How to Replace Side Mirror of Harley Davidson?

The Harley Davidson Touring is a large Motorcycle, having proper side mirrors are crucial for your safety and security. Whether you wish to replace your mirrors because they broke, or you want custom-made aftermarket ones, this guide will certainly aid you in doing so. The dealership has been known to charge up to 100 for this procedure, not counting the price of the parts. Once you review this article, you will comprehend why you need to do this procedure by yourself. Keep reading to find out how to change the side mirrors on your Harley Davidson Touring. Products Needed

  • Allen wrenches
  • Wrench or outlet and also cog
  • Torx head outlet with expansion

Harley Davidson Touring models differ commonly, however there are only 3 differences that matter for changing a mirror. There are old school cops Motorcycle windshield versions like the present Road King, batwing fairing versions like the Road Glide, and structure placed fairings like the Roadway Glide. If your Motorcycle has the large frame installed fairing, or the marginal windscreen, you most likely have mirrors mounted to the handlebars. Batwing fairings normally have actually the mirrors placed to the outdoors edges of the fairing. Check this out motoprove.com to know more.

Mirror of Harley Davidson

If you have mirrors mounted in a batwing fairing, simply avoid down to the 2nd section.

Handelbar Placed Mirrors:

Eliminate pinch screw:

On some Motorcycles there might be a turn indicator placed to the master cylinder right below the mirror you have to remove it in order to make it much easier to obtain the mirror off. Using your Allen secret, remove the Allen screw that pinches the directional signal in position. Then, pull the directional signal down and out of the way. You do not need to remove anything additionally in it, simply let it hang.

Remove mirror nut and mirror:

There is a nut on the bottom of the mirror shaft, it is really apparent. Hold the mirror in position with your hand, and also loosen the nut under. Once you have actually removed it, draw the mirror directly to remove.

Mount brand-new mirror:

To install the brand-new mirror, put simply its rod with the opening and tighten the nut from all-time low. Tighten it so the mirror does not revolve conveniently, rest on the Motorcycle and also read it to the appropriate placement, after that tighten up the nut simply a bit a lot more so it does not relocate the wind. Place the directional signal in position if you have one, and tighten the pinch bolt using your Allen trick.